GSM signal Booster network GSM900mhz ST980A Coverage 1000sqm
What is the booster?
A mobile phone signal repeater provides the ultimate solution in any area where cellular communications can not work well due to leak of signals. The repeater device features easy installation & operation, build-in indoor antenna and no interference. It could also improve indoor electromagnetism environments, protract cellular battery life and reduce radiation of cell phones.
A mobile phone repeater is ideal for house, home, and office use.
Application:
The signal booster/repeater makes the signal stronger in places with poor signal coverage such as:
1) Underground areas: basements, parking lots, tunnels;
2) Other places where cellular signal is shielded by metal or concrete walls: offices, supermarkets, cinemas, hotels;
ST Mobile Signal Repeater ST980A Features:
1.Enhance Mobile Phone Signal Strength
2.Improve Communication Quality
3.Reduce Cell phone Radiation
4.Protract Cellular Battery Life
5.Economic Building Cost
6.Easy Operation
7.Easy Installation
8. Great coverage up to 1500sqm.
Specification of Mobile Signal Repeater ST980A
Specification |
uplink |
downlink |
|
Frequency :GSM900mhz |
890-915mhz |
935-960mhz |
|
Max Gain |
70dB |
75dB |
|
Bandwidth |
25MHZ |
||
Ripple in Band |
≤8dB |
||
Max. Input Power Without Damage |
0 dBm |
||
Output Power |
23dBm |
24 dBm |
|
Noise Figure @ max. gain |
4.5db |
8db |
|
Return loss |
≤-8 dB |
||
Time Delay |
≤0.5 μs |
||
MTBF |
> 20000 hours |
||
Power Supply |
AC:90~265V, 50/ 60Hz;DC:5V 2A |
||
Power Consumption |
4W |
||
Impedance |
50 Ω |
||
RF Connector |
N -Female |
||
Cooling |
Heatsink Convection cooling |
||
Dimensions (D x W xH ) |
275*178*55MM |
||
Weight |
0.6KG |
||
Installation Type |
Wall Installation |
||
Environment Conditions |
IP40 |
||
Humidity |
<90% |
||
Operating Temperature |
-10°C ~ 55°C |
Mobile Phone signal Booster Installation complete kit items
Signal booster
Outdoor antenna
Indoor antenna
Cable
Splitter (When there are more than 2 indoor antennas)
Connector(N connector, F connector, N to F connector, SMA connector etc)
Mobile Phone Signal Repeater Installation Steps
Step 1: Install the outdoor antenna in a suitable place
Step 2: Connect the outdoor antenna to the booster “outdoor” side by cable and connector
Step 3: Connect the indoor antenna to the booster “indoor” side by cable and connector
Step 4: Connect to the power
LED Indicates
LED |
Status |
Definition |
Power |
Red |
Normal |
Off |
DC power problem |
|
White |
No signal received |
|
Solution: Adjust the outdoor installation to get sound signal(see page 14) | ||
Green |
Signal received ok but not perfect |
|
Solution: Adjust the outdoor installation to get sound signal(see page 14) | ||
Red |
Full signal received |
|
UP(Uplink)) |
Flicker |
When there is a call, it is normal |
Green |
Always green means self-excited |
|
Solution: Turn off the booster, adjust the indoor and outdoor antenna again, and try to expand the distance or create some barriers between them. |
Terms and Conditions
Certificate |
CE/RoHs |
Country of Origin |
China |
Port of Dispatch |
Shenzhen |
Production Capacity |
1000pcs/month |
Date of Delivery |
Within 3 days after received payment inform |
MOQ |
10pcs |
Warranty |
2years |
Pacakge |
1pcs/box; 20pcs/carton |
Country of Origin |
China |