PP Medical Components Making Injection Molded PC ABS Parts
1.Buying Guides
How to get satisfied quotation quickly from us?
When you want to ask for mold price and unit part price, please do as these four steps.
A Grade |
B Grade |
C Grade |
D Grade |
|
Mold base Standard |
HASCO/DME |
LKM |
LKM |
Chinese Local |
Cavity steel |
H13,2344,2343,8407 Heat |
718, 738, P20HH, NAK80 |
Local P20, WY718 |
Aluminum, S50C |
Standard |
HASCO, DME |
LKM |
Chinese Local |
/ |
Mold life |
>500,000~3000,000 |
300,000~500,000 |
100,000~300,000 |
>10000 |
Runner |
Hot runner, cold runner |
Hot runner, cold runner |
Cold runner |
Cold runner |
Mold price |
Most expensive |
Expensive |
Cost-effective |
Cheapest |
1) Please try to tell us which grade would you want according to following form:
2) Tell us: Do you want mold only or want mold and plastic product?
3) Tell us: Plastic type and QTY you want?
4) Send us the 3D product drawing (or sample, or pictures with ruler )
2.Product Introduction
Name |
Medical Components Making Injection Molded PP ABS Parts |
Mould material |
SKD11, ASP-23, SKH9, SKD61, P20, NAK80 |
Mould base |
LKM & HASCO & DME Standard |
Hardness of Cav&Cor |
HRC 48-52° |
Runner |
Cold runner |
Mould life |
300,000-500,000shots |
Product material |
PA,PA6/6+GF,ABS,POM,PC,PP,PET,TPE,PVC,HDPE,PMMA |
MOQ |
1000pcs |
Design software |
CAD, UG, Pro E |
Payment terms |
T/T, L/C |
Delivery time |
10-20 days |
Specification |
Depends on customer’s requirements |
3.Product Pictures
4.Project Process
5.About US
Our Advantage
Competitive price with high quality
Equal in quality, our mold price is 30% lower, and a discount for a big order is certainly valid.
Because WT mold is an original manufacturer, according to different requirement, our experience technicians can provide reasonable design and advise suitable material to save cost, while keeping high quality, they can also help to optimize the structure of products if needed.
Knowledgeable and high precision
We are familiar with DME HASCO and other standards, we can make molds for vehicle parts with high tolerance requirements.
Stringent quality system
Very process is strictly controlled to prevent problems before they arise.
Planned Delivery
Reasonable planning, perfect designs and low error rate ensure us to proceed as planned.
Our QC Inspect
Our Certification
Our Service
6.Packing And Shipping
7.FAQ
Q1: What kind of steel do you use for plastic mould?
We can use any type of steel appointed by customer or popular in the market.
Such as P20, 718, 8407, NAK80, H13, S136, DIN 1.2738, DIN 1.2344, etc.
Q2: What is the minimum & maximum unit weight and size your machines can produce?
Our machines produce the unit parts from 1 gram to 6000 grams weight.
Our machines can produce the maximum size of unit plastic part: 1.5*1.5*1.5 meters.
Q3: Do you have the checking system to make sure the mould quality?
We have a complete management system. Our project dept. will arrange mould checking and supply the checking report in detail. Only when the mould is qualified, can the mould be shipped out.
Q4: How about certificate?
We will make 100% full inspection and provide the inspection reports.
Q5: I have no 3D drawing, how should I start the new project?
You can supply us a sample, we will help to finish the 3D drawing design.